Bpt mitho+ - Electric Automation and Anti-Intrusion

59
Technical Manual
GB
Anti-intrusion system
As for the electric automation, it is possible to interface with the anti-intrusion system on a Brahms 2-wire
B2 bus.
This makes it possible to manage the total or partial activation and deactivation of the alarm system and
display the status of the various controlled zones.
System B2
and
System C4
SERIAL
INTERFACE
GATEWAY
AUTOMATION
POWER SOURCE
ANTI-INTRUSION
CONTROL UNIT
SIREN SENSORPOWER SUPPLIERS
Electric Automation
Mitho interfaces with the world of BPT home automation through the gateway. Using a programmable
logic system, comprised of a series of devices and a  eld bus, it is possible to manage the electric automa-
tion (scenario control, light control, opening control, irrigation, blinds, etc.) and heat regulation.
HOME AUTOMATION NODES
* NOTE:
the cable used is the bus BPT NH-C1D
Twisted pair
LOCAL POWER
SUPPLIER
ManTecnico_MithoPlus IT_GB 2484559 59ManTecnico_MithoPlus IT_GB 2484559 59 18-06-2008 11:49:4718-06-2008 11:49:47