3
1. Before You Begin
DON’T
• Handle the power cord or the
plug with wet hands. This
could result in an electric
shock.
• Use any AC adapter or cord other than the one provided in
your package. This could result in fire, electric shock or printer
failure.
• Pull the AC cord. This could damage the cord.
• Connect the printer to a
multi-outlet adapter or
extension cord. This could
result in fire or electric
shock.
• Clean the printer with paint thinner or use inflammable sprays
near the printer. The thinner or spray could come into contact
with the internal components of the printer and cause a fire or
electric shock.
• Place the printer near water, heat sources (such as sparks or
flames) or inflammable materials (such as paint thinner and
alcohol). This could cause a fire, electric shock or printer
damage.
• Place the printer on a rug or a carpet. Fibers and dust could
get inside the printer and cause a fire.
• Place heavy or metal objects on the printer. This could damage
the printer.
• Place the printer on an unstable surface. The printer could fall
or tip over, be damaged and/or cause injury.
• Insert your finger or other
foreign objects into the
sides of the printer. You
could injure your finger
and/or damage the
printer.
• Feed wires into the printer. This could damage the printer.
BMP91UG.book Page 3 Friday, October 14, 2011 7:56 PM
To Next Page
Loading...
Need help?
General
