English
42
4. Entering and Editing Text/Symbols
2. Enter [Menu] > Font > “Scale”.
3. In the Scale list, select the desired zoom factor (e.g. 50%,
75%, 125% or 150%) and press [OK].
4. Press [Close] to return to the Tag Editor.
To set the text/character spacing:
1. Move the cursor the line where you want to apply the spacing.
2. Enter [Menu] > Font > “Spacing”.
3. In the Spacing list, select an option (“Normal”, “Expanded 1”,
“Expanded 2”, “Expanded 3”, “Expanded 4” or “Expanded
5”) and press [OK].
4. Press [Close] to return to the Tag Editor.
To add (or remove) an underline for the digits “6” and “9”:
1. Enter [Menu] > Settings > “6 and 9”.
2. Select “On” (or “Off”) and and press [OK].
3. Press [Close] to return to the Tag Editor.
H. Adding Serialization to a Tag
To open the Serialization menu:
1. Enter [Menu] > “Quick Keys” > “Serialization”.
Shortcut: Press the [Serial] quick key.
To add serialization to a Tag:
1. Press the [Serial] quick key.
The Serialization menu appears.
2. In the Serialization menu, select “0–999”, “a–z” or “A–Z”.
If the “0–999” option is entered, set the “Start” number
(default is 0), the “End” number (default is 1) and the
“Increment By” number (default is 1) and then press [OK].
If the “a–z” option is entered, set the “Start” alphabet (default
is a), the “End” alphabet (default is b) and the “Increment By”
number (default is 1) and then press [OK].
To Next Page
Loading...
