68
5. Advanced Functions
MENUS (Level 2) MENUS (Level 3) /“Options” MENUS (Level 4) / “Options” / Notes
TAG EDIT submenu “Go To” (enter Tag number in text box)
“Copy”
“Cut”
“Paste” (before or after current tag)
“Insert”
DELETE (“Current Tag”, “All Tags”, or SET RANGE)
PROPERTIES submenu
Note: All changes in
Properties are applied to the
current Tag”. To apply to all
tags, use Apply Current Tag
Settings submenu
• SET MULTI-LINE: “1”/”2”/”3 lines”; Center Line
(“On”/”Off”)
• ALIGNMENT: Horizontal (“Left”/”Center”/”Right”),
Vertical (“Top”/”Middle”/”Bottom”)
• FRAME: Select “None” or a frame
• ROTATION: “Horizontal”, “Hor Rotated”, “Vertical”
• CONTINUOUS PRINT: Number (default is “1”)
• SEGMENT LENGTH: “Auto-sized”/“Fixed-size”
• PRINTING ADJUSTMENTS: “Lead Adjust”, “Vertical
Adjust”, “Length Adjust” (in mm)
APPLY CURRENT TAG
SETTINGS submenu
* “All Tags”
* SET RANGE
DEFAULT SETTINGS
submenu
“Save Current Tag as default”
“Reset for Current Media”
“Reset for All Media”
BMP91UG.book Page 68 Friday, October 14, 2011 7:56 PM
To Next Page
Loading...
