What to do if hoses emptying is not completed with pressure at 0 bar on BrainBee multigas 8500 Air Conditioner?
If hoses emptying is not completed with pressure at 0 bar (empty circuit) in your BrainBee Air Conditioner, the pressure sensor may not be calibrated. First, check for leaks from OUT “R”, and calibrate the pressure sensor.
What to do if initial verification is not correctly carried out on my BrainBee Air Conditioner?
If the initial verification is not correctly carried out on your BrainBee Air Conditioner, it indicates a mistake during the procedure. Repeat the pressure sensor calibration.
What causes ADC converter malfunctioning in BrainBee Air Conditioner?
If the ADC converter is malfunctioning, causing equipment error or non-functionality in your BrainBee Air Conditioner, it indicates ADC failures. Replace the logic electronic board.
Why is the power cut-off by pressure switch in my BrainBee Air Conditioner?
If the power is cut off by the pressure switch in your BrainBee Air Conditioner, it could be due to a blocked check valve before the internal vessel or a closed manual valve before the internal vessel. Substitute the hose of check valve or open the manual valve.
General information about the manual and product.
Overview of the manual's content and purpose.
Crucial safety instructions for operation and maintenance.
Guidelines for safe handling of refrigerants and waste.
Guidance on how to use the service manual effectively.
Explanation of safety and marking symbols used in the manual and on equipment.
Step-by-step procedure for installing the MULTIGAS 8500 equipment.
General overview of periodical and preventive maintenance tasks.
Detailed procedure for vacuum pump oil maintenance.
Procedure for replacing the dryer filter.
Procedure for checking hoses and quick couplers for wear.
Details of service kits for R134A and R1234YF gas stations.
Step-by-step guide for pressure calibration using the service kit.
Procedure for calibrating the gas weight scale.
Procedure for calibrating the oil weight scales.
Procedure for converting the station from R134a to R1234yf.
Instructions for updating the equipment software and database.
Steps for purchasing and activating new database versions.
Lists necessary service kits and software for operation.
Diagram and explanation of the refrigerant fluid circuit.
Explanation of the equipment's operational cycles.
Details about the receiving tank and its safety features.
Identification and function of manifold valves.
Guidance on using Loctite 577 for non-permanent junctions.
Diagram showing electrical connections between components.
Lists components for routine and extraordinary maintenance.
Comprehensive list of parts for extraordinary maintenance.
Details on extraordinary maintenance procedures.
Lists malfunctions, causes, and solutions for common issues.
List of error messages, their causes, and recommended actions.
General| Brand | BrainBee |
|---|---|
| Model | multigas 8500 |
| Category | Air Conditioner |
| Language | English |
To Next Page
