www.bresser.de
Chapter 8:
Extended print functions
If you're familiar with the basic features of the 3D printer, you'll want to take
advantage of the advanced printing features available to you. This chapter
describes these advanced printing functions.
In the expert mode there are more possibilities to edit the parametres. You can
choose between two modes: "Basic Mode" and "Expert Mode".
8-1
Select Profile: This option allows you to select the required scheme. Three
options are available (low/standard/high). PLA is set by default. The different
schemes correspond to the different parametre settings. The high quality
scheme creates high resolution objects, but results in slow processing speed.
To Next Page
Loading...
