Bresser Rex II - Safety Instructions; Safety in the Working Environment; Security of Power Supply

www.bresser.de
8
Safety Instructions
IMPORTANT NOTE:
Familiarise yourself with this manual and read all the instructions it contains
before you start setting up and operating the machine. Failure to heed warnings
and instructions may result in personal injury, fire, and damage to the unit or
other property.
STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS GIVEN IN
THIS MANUAL AT ALL TIMES!
Safety in the working environment
① Keep the workplace clean!
② Do not operate the 3D Printer in the presence of flammable liquids, gases or
dust.
③ Keep children and untrained persons away from the 3D printer.
Security of power supply
① Operate the 3D Printer only from a earthed power outlet. Do not make any
changes to the power plug of the 3D Printer.
② Do not operate the 3D printer in a hazy or humid environment.
Do not expose the 3D printer to direct sunlight.
③ Do not use the power cord for any purpose other than its intended use.