www.bresser.de
④ Do not operate the unit during thunderstorms.
⑤ To avoid accidents, disconnect the device from the power supply if you are
not going to use it for a long periodof time.
- safety of people
① Do not touch the nozzle or pressure plate during printing.
② Do not touch the nozzle after printing is completed.
③ Wear suitable clothing. Do not wear loose clothing or loose-fitting jewellery.
Make sure that your hair, clothing and gloves do not come into the vicinity
of moving parts.
④ Do not operate the device if you are tired or under the influence of drugs,
alcohol or medication.
• Precautions
① Do not leave the device unattended for a longtime.
② Do not make any changes to the device.
③ Lower the pressure plate before inserting/removing filament. (The distance
between nozzle and pressure plate should be at least 50 mm)
④ Operate the device in a well-ventilated environment.
⑤ Do not use the device for unlawful purposes.
To Next Page
Loading...
