www.bresser.de
The lower quality scheme, on the other hand, produces low resolution objects
and is characterized by fast processing speed. When printing with PLA, the
"Hyper" option is still available to users.
General
1) Layer height
A Layer Height: Layer thickness. The lower the layer thickness, the longer the
printing time and the better the print quality.
b. First Layer Height: When printing with a low layer thickness, a thicker first
layer improves adhesion and tolerance to printing platforms that may be worn.
2) Speed
A Base print speed: The reference value for the speed at which the extruder
moves during the printing process (for subsequent calculation of the printing
speed) At lower speeds, the printer can create objects with a higher resolution
and a smoother surface.
b. Travel Speed: Speed at which the extruder moves when no filament is applied.
C Minimum speed: The minimum speed at which the extruder moves during
printing.
D First Layer Maximum Speed: The maximum print speed for the first layer
(Note: This setting is not necessary if the model has a base plate)
D First Layer Maximum Travel Speed: The maximum speed of the extruder
when printing the first layer, when no filament is applied (Note: This setting is
not necessary if the model has a base plate)
3) Temperature
The temperature for the "extruder" is displayed.
4) Retraction
To Next Page
Loading...
