Bresser Rex II - Advanced

www.bresser.de
84
Advanced
1）Stepper Motor Voltage (it is recommended to keep the default value)
A X-Axis: Voltage parametres of the X axis stepper motor. The higher the
value, the more heat is generated.
b. Y-axis: Voltage parametres of the stepper motor of the Y axis. The higher
the value, the more heat is generated.
C Z-Axis: Voltage parametres of the stepper motor of the Z axis. The higher
the value, the more heat is generated.
D A-Axis: Voltage parametres of the stepper motor of the right extruder. The
higher the value, the more heat is generated.
e B-Axis: Voltage parameters of the stepper motor of the left extruder. The
higher the value, the more heat is generated.
8-7