Briggs & Stratton Fortress User Manual

Not for
Reproduction
27
Advanced Screen Settings
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items
and/or to change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken
when working in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for
the generator and region where the generator is being operated. Confirm all settings before operating the
generator for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
ok
ok
ok
for 3 seconds or
see pg. 29 for additional key sequence. Follow the prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key
ok
ok
ok
must be pressed once to enter the menu and again to change any setting. After each confirmation of a
setting, the selection will display solid for 2 seconds before moving to the next program item.
SOFTWARE VERSION
DISPLAYED
CAN BUS TEST
VOLTS
PHASE
HZ
KW
KW
FLASHING
50/60 Hz
FLASHING
SINGLE
or
THREE
FLASHING
ON
FLASHING
VOLTS
FLASHING
or
or
or
or
or
or
or
or
or
or

Briggs & Stratton Fortress Specifications

General

Voltage	120/240V
Frequency	60 Hz
Fuel Type	Gasoline
Wheel Kit	Included
Outlets	(2) 120V 20A Outlets, (1) 120/240V 30A Locking Outlet