Brivo B-ACS6100L-E User Manual

Brivo ACS6100
Installation Manual
Introduction
I
Legal Disclaimers ............................................................................ 2
Introduction ..................................................................................... 4
Pre-Installation Procedures
II
Understand the function of the B-ACS6000-MBE/MBS .............. 6
Understand B-ACS6000-MBE/MBS product compatibility ......... 6
Verify client site is ready for installation ...................................... 6
Verify shipping contents ................................................................ 7
Planning the installation ................................................................ 9
Follow safety precautions ............................................................ 11
General Assembly Procedures
III
Assemble and mount chassis ...................................................... 12
Connect the main control board and all expansion boards .... 16
ACS6000 control panel tamper switches ................................... 17
Connect the battery leads to the power supply ........................ 19
Wire the AC/DC power adapter to the power supply ............... 19
Powering and Testing
Procedures
V
Power up the control panel ......................................................... 36
Installation Procedures
IV
Establish CAN Bus wiring ............................................................. 21
Wire doors ..................................................................................... 24
Wire OSDP Readers ...................................................................... 27
Wire input output boards ............................................................ 33
Mount and connect the Wi-Fi antenna ....................................... 34
Ground the chassis ....................................................................... 35
Conguration Procedures
V
Connecting a laptop to the main control board admin port ... 38
Connect the LAN to the main control board ............................. 38

Brivo B-ACS6100L-E Specifications

General

Model	B-ACS6100L-E
Communication	Ethernet, RS-485
Operating Humidity	0% to 95% non-condensing
Inputs	4 supervised inputs
Humidity	0% to 95% non-condensing
Type	Access Control Panel
Card Format	Wiegand
Reader Interfaces	Wiegand
Relay Outputs	4 Form C relay outputs
Certifications	CE

Summary

Introduction

Pre-Installation Procedures

Understand Control Panel Functionality

Verify Client Site Readiness

Verify Shipping Contents

Plan Installation Site and Panel Size

Determine Chassis Placement and Distance

General Assembly Procedures

Assemble and Mount Chassis

Step-by-step instructions for assembling and securely mounting the control panel chassis.

Control Board and Expansion Board Switch Locations

Connect Boards to Power Supply

Instructions for connecting the main and expansion boards to the power supply board.

ACS6000 Control Panel Tamper Switches

Optional Physical Tamper Switch Connection

Connect Battery Leads to Power Supply

Steps for connecting battery wires to the power supply's input terminal block.

Wire AC/DC Power Adapter to Power Supply

Instructions for connecting the AC/DC power adapter to the power supply board.

Installation Procedures

Establish CAN Bus Wiring

Procedures for connecting boards and chassis using the CAN Bus communication protocol.

Wire Doors for Readers

Detailed instructions for wiring doors to reader terminals for Wiegand readers.

Wiring OSDP Readers and Transceivers

Guidelines for connecting OSDP readers and Allegion transceivers using RS-485.

RS-485 and Duplex Mode Switch Configuration

Details switch settings for RS-485 communication and duplex modes on control boards.

RS-485 Termination and Wet/Dry Switch Settings

Explains the configuration of RS-485 termination and wet/dry switches for door contacts.

Wiegand and OSDP Reader Wiring Guide

Provides wiring instructions for Wiegand and OSDP readers using terminal blocks.

Install MOVs for Noise Suppression

Wire INPUT OUTPUT BOARDS

Input/Output Board Wiring

Powering and Testing Procedures

Power Up the Control Panel

Check Power Indicators and Heartbeats

Check Expansion Board Heartbeats

Configuration Procedures

Connect Laptop to Admin Port

Connect LAN to Main Control Board