Brooks VX TopCooler - O-Ring Removal;Replacement;Cleaning

Brooks Automation 4. Maintenance and Repair
Part Number: 606325 Rev. A O-Ring Removal/Replacement/Cleaning
O-Ring Removal/Replacement/Cleaning
AllO-ringsshouldbeinspectedperiodicallytoensureproperoperation.OccasionallyO-ringswill
needtobecleaned(ifcontaminatedwithparticulates)orreplaced(ifdamaged).
ProcedureCategory
Equipmentisfullyde-energized.
RequiredTools
l
Brassorplasticpick
l
IsopropylAlcohol(100%)
l
DIWater
MaintenanceStrategy
TheO-ringreplacementprocedurerequiresremovaloftheexistingO-ring,inspectionoftheseal
area,repairofthesealareaifnecessary,inspectionoftheO-ring,andreplacementoftheO-ringif
necessary.
Turnoffanddisconnectallpower,communications,andairconnectionsasdetailedintheShut-
downsectionofthesystemmanual.
Lockout / Tagout
Workingwithenergizedequipmentmaycausesuddenmovementorelectricalshockand
mayresultindeathorseriousinjury.
l
Allenergymustberemovedfromtheequipmentperthefacility’s
Lockout/Tagoutprocedurebeforeservicing.
l
Iflocalproceduresarenotavailable,followtheprocedureforLockout/Tagoutin
OSHA Standard 29CFR 1910.147.

Copyright © 2023, Brooks Automation, Inc.
27