7 | DEDisplay Remote // Display Central // About these original operating instructions
These original operating instructions – hereinafter referred to as the operating
instructions – are based on the standards and regulations applicable in the
European Union and contain important information on the use of Brose
components.
About these original operating instructions
1 Supplied documents
These operating instructions are part of
the original operating instructions for the
Brose Drive System.
The complete original operating
instructions consist of all documents
relating to the individual components of
the Brose Drive System installed in your
e-bike.
The component composition for the
Brose Drive System installed in your
e-bike can be found in the enclosed data
sheet from the e-bike manufacturer.
It is imperative that you read and
observe:
∙ The e-bike manufacturer's operating
instructions,
∙ The operating instructions of the
supplementary components of the
Brose Drive System,
∙ The operating instructions for
additional equipment and optional
extras.
2 Read and keep the operating instructions
Read the operating instructions in the
following chapters carefully, especially
the safety instructions, before using
components of the Brose Drive System.
This user manual contains information
for the safe and error-free use of the
Brose Display Remote E41227 and the
Brose Display Central E41229 for the
Brose Drive System.
They do not contain any instructions
for the operation of the complete Brose
Drive System (information on this
topic can be found in the applicable
documents).
∙ Keep the operating instructions within
easy reach of all users for further use.
∙ If you pass your e-bike or individual
components of the Brose Drive
System on to third parties, always
include the relevant operating
instructions and all applicable
documents.
To Next Page
Loading...
