31 | DEDisplay Remote // Display Central // View
22 Battery charge level indicator
The charge status of the battery is
displayed in the operating unit or the
display unit.
Depending on the equipment of your
e-bike, the charge level of the battery
can also be read from the battery.
INFORMATION
When operating with the Brose Display
Central display unit, the displays on the
Brose Display Remote control unit are
deactivated.
INFORMATION
If the charge level is < 5%, the motor
support is switched off to ensure the
use of the lighting for a further 2 hours
in an emergency.
22.1 Display on the Display Remote
control unit
Display Charge level/Info
100%
to
20%
< 10%
< 5%
Loading error!
(see chap. 27.1 on
page 37)
22.2 Display on the Display Central
display unit
Display Charge level/Info
100%
to
30%
< 20%
< 10%
The charge level of the battery can be
shown on the display of the display unit
as segments and/or as a percentage
(see chap. 25 on page 34)
.
If the battery charge level is <10%, the
charge level display starts flashing.
If the battery is being charged on the
bike, a corresponding message is
displayed.
75 %
Fig. 8: Charging the battery
To Next Page
Loading...
