Brose Display Remote - Error indications on the Display Remote

37 | DEDisplay Remote // Display Central // Menu and settings
27.1 Error indications on the Display Remote control unit
Display of LED band Remedy
Extreme temperatures cause an error.
Disconnect the battery and charger from the power
source and wait until the temperature of the battery and
charger has normalised.
The temperature must be between 0° and +45°C.
Reconnect the battery and charger to the power source.
A serious error has occurred.
Contact an authorised Brose dealer.
Switch off the Brose Drive System.
Check the speed sensor and the position of the magnet.
Restart the Brose Drive System.
Restart the Brose Drive System.
If the problem persists, contact an authorised Brose
dealer.
Switch off the Brose Drive System.
Check all lines and plug connections of the brake
system.
Restart the Brose Drive System.
Switch off the Brose Drive System.
Check all lines and plug connections of the front and/or
rear lighting system.
Restart the Brose Drive System.