DE | 26 Operation and handling // Display Remote // Display Central
16 Selecting the support level
Your Brose Drive System has four levels
of support.
You can adjust how much the e-bike
drive supports you during pedalling on
the control unit. The support level can be
changed at any time, even while riding.
To increase the support level, press the
button on the control unit repeatedly
until the desired support level appears
in the display. To decrease, press the
button.
The characteristics of the respective
support mode can be seen in the
“Overview of the support levels” on
page 27
table.
INFORMATION
During the operation of the Display
Central display unit, the displays on
the Display Remote control unit are
deactivated.
16.1 Display Remote control unit
During the ride, the current charge
status of the battery is displayed in the
LED band.
∙ Press the or button to switch to
the support level display.
› The current support level is
displayed in the LED band for 5
seconds.
∙ Press the or button again to
change the support level.
16.2 Display Central display unit
Depending on the selected user
interface, the support level is displayed
as a coloured band or text in the status
bar
(Fig. 4, p.23)
during the ride.
∙ Press the or button to change
the support level.
› The selected support level is
displayed as text for two seconds in
the trip information area.
To Next Page
Loading...
