What to do if my Brother Printer displays 'Power shortage (Code:01)'?
If your Brother Printer displays 'Power shortage (Code:01)', when using a USB Type-C cable, use a computer with a USB Type-C port supporting more than 15 W output or higher. Use only a Certified USB Type-C cable.
How to fix 'Card JAM' on Brother ADS-1300?
To resolve the 'Card JAM' error on your Brother Printer, remove the plastic card. To prevent future jams: - Do not leave the card inserted in the machine. - Insert embossed cards with the embossed side up. - Insert the plastic card straight according to the guidelines.
What to do if my Brother ADS-1300 Printer says 'Insufficient USB Storage'?
If your Brother Printer shows 'Insufficient USB Storage', press 'Close' and either delete unused files from the USB flash drive or use a USB flash drive with more free space.
What to do if my Brother ADS-1300 Printer displays 'Wrong Network Key'?
If your Brother Printer displays 'Wrong Network Key', confirm the Network Key and try again.
What to do if my Brother ADS-1300 displays 'USB Host is write protected'?
If your Brother Printer displays 'USB Host is write protected', remove the write-protected USB flash drive, press 'Close', and then either turn off the USB flash drive’s write-protection or use a USB flash drive that is not write-protected.
What to do if my Brother ADS-1300 Printer displays 'Replace Separation Pad'?
If your Brother Printer displays 'Replace Separation Pad', replace the Separation Pad with a new one.
What to do if my Brother ADS-1300 Printer displays 'Setting Lock'?
If your Brother Printer displays 'Setting Lock', disable the Setting Lock.
What to do if my Brother ADS-1300 displays 'No Certificate'?
If your Brother Printer displays 'No Certificate', start Web Based Management. In the left navigation bar, click Administrator > Signed PDF, and then configure the settings.
What to do if my Brother ADS-1300 Printer displays 'No Access Point'?
If your Brother Printer displays 'No Access Point', check that you did not press the WPS button on two or more wireless access point/routers. Restart the machine and the wireless access point/router.
What to do if my Brother Printer displays 'No Document / Card'?
If your Brother Printer displays 'No Document / Card', load a document or card.
To Next Page
General
