Brother ADS-1300 - Install or Remove the Output Tray

Home > Routine Maintenance > Replace Supplies > Install or Remove the Output Tray
Install or Remove the Output Tray
The Output Tray is an optional accessory.
>> Install the Output Tray
>> Remove the Output Tray
Install the Output Tray
1. Align the holes on the bottom of the machine with the docking pins on the Output Tray and push them
together as shown.
2. Slide the machine to the left to secure it.
3. Open the Top Cover (1), and then lift the Document Support Arms (2).
2
1
252