Home > Scan > Scan Using the Scan Functions on Your Brother Machine > Save Scanned Documents
Using Scan to Workflow Function
Save Scanned Documents Using Scan to Workflow Function
Related Models: ADS-1800W
Before scanning, do the following using Brother iPrint&Scan (for Windows and Mac):
1. Set up the Scan to Workflow settings. For more information, see Related Topics.
2. In the home screen, click Machine Scan Settings > Workflow, and then select the workflow you created.
1. Load your document.
2. Press d or c to display [to Workflow], and press it.
3. Select the destination where you want to save your scanned documents. If multiple computers are connected
to the machine, press a or b to display the destination computer you want to save to, and press it.
4. Select the workflow.
5. Press [Start].
To save the settings as a shortcut, press [Save as Shortcut].
The machine starts scanning.
Related Information
• Scan Using the Scan Functions on Your Brother Machine
Related Topics:
• Configure Scan to Workflow Settings Using Brother iPrint&Scan
47
To Next Page
Loading...
