Brother ADS-1300 - Load Non-standard Size Documents

Home > Paper Handling > Load Documents > Load Non-standard Size Documents
Load Non-standard Size Documents
Make sure documents with ink or correction fluid are completely dry.
1. Fold your document in half and insert it into the Carrier Sheet (not included).
a
b
a. Document is Face Down
b. Carrier Sheet Header is Face Up
Set the document in the centre of the Carrier Sheet and align the top edge of the document with the top
edge of the Carrier Sheet.
2. Adjust the Paper Guides (1) to fit the width of the Carrier Sheet.
1
38