Brother ADS-1300 - Control Panel Overview

Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
>> ADS-1300
>> ADS-1350W
>> ADS-1800W
ADS-1300
1 2
4 36
5
1. Error LED
It flashes when the machine detects an error.
2.
(Power On/Off)
Press to turn the machine on.
Press and hold to turn the machine off.
3.
(Stop)
Press to stop your current action and return to Ready Mode.
4. Device Scan Buttons
•
Button 1
Press to perform a "Scan to" function after you have assigned it to this button. You can assign
one of these "Scan to" functions to use as a shortcut:
- Scan to USB
- Scan to PC
Assign the function you want to
using Remote Setup.
•
Button 2 / Button 3
Press or to perform a "Scan to PC" function. You can assign "Scan to PC" option settings
to use or as shortcuts.
To change other scan settings (such as File Type and Resolution) to
when it is assigned as "Scan to
PC", , or , start Brother iPrint&Scan, select your machine, and then click the Machine Scan
Settings button.
10