Press to perform a "Scan to" function after you have assigned it to this button. You can assign
one of these "Scan to" functions to use as a shortcut:
- Scan to USB
- Scan to PC
- WS Scan
Assign the function you want to
using Remote Setup or Web Based Management.
•
Button 2 / Button 3
Press or to perform a "Scan to PC" function. You can assign "Scan to PC" option settings
to use or as shortcuts.
To change other scan settings (such as File Type and Resolution) to
when it is assigned as "Scan to
PC", , or , start Brother iPrint&Scan, select your machine, and then click the Machine Scan
Settings button.
• Install a scanning application (for example, Brother iPrint&Scan) and configure the settings using the
application before scanning from the machine.
• If your machine is connected via a network, we recommend using Web Based Management to configure
the Scan Destination setting.
7. USB LED
It is lit when the Scan to USB function is available.
8. Feed Selector (
(ADF Mode)/ (Plastic Card Mode) )
Slide to select the scanner feed mode.
ADS-1800W
1. (Power On/Off)
Press
to turn the machine on.
Press and hold to turn the machine off. The touchscreen displays [Shutting Down] before turning off.
2.
(Back)
Press to go back to the previous screen or menu.
3. (Home Button)
Press to return to the Home Screen and Ready Mode.
12
To Next Page
Loading...
