Brother ADS-1300 - Assign Scan Functions to Device Scan Button 1

Home > Introduction to Your Brother Machine > Control Panel Overview > Assign Scan Functions to
Device Scan Button 1
Assign Scan Functions to Device Scan Button 1
Related Models: ADS-1300/ADS-1350W
Assign one of the following scan functions to (Button 1) if you want to use as a shortcut button:
• Scan to USB
• Scan to PC
• WS Scan (ADS-1350W)
Before scanning, install a scanning application (for example, Brother iPrint&Scan), and then configure the scan
settings using the application.
>> Assign using Remote Setup When Your Machine Is Connected via a USB Cable
>> Assign using Web Based Management When Your Machine Is Connected via a Network
Assign using Remote Setup When Your Machine Is Connected via a USB Cable
1. Do one of the following:
• Windows
Launch (Brother Utilities), and then click the drop-down list and select your model name (if not
already selected). Click Tools in the left navigation bar, and then click Remote Setup.
• Mac
In the Finder menu bar, click Go > Applications > Brother, select your model name, and then double-
click the Brother Remote Setup icon.
If the Search Devices dialog box appears, select your model name and then click Connect.
2. Select the Scan Destination menu in the navigation pane, and then select the option you want to assign in
the Button 1 field.
• Select the Automatically switch to "Scan to USB" if a USB flash drive is inserted. checkbox if
needed.
• (ADS-1350W) Select the WS Scan option, and then select the computer name where you want to send
the data in the "WS Scan" Destination field.
3. Click OK to close the Remote Setup window.
Assign using Web Based Management When Your Machine Is Connected via a
Network
This feature is available for ADS-1350W.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the bottom of the machine and
marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Scan > Scan Destination.
14