Home > Security > Use Secure Function Lock 3.0 > Register an External IC Card Reader
Register an External IC Card Reader
Related Models: ADS-1800W
When you connect an external IC (Integrated Circuit) card reader, use Web Based Management to register the
card reader. Your machine supports HID class driver supported external IC card readers.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If required, type the password in the Login field, and then click Login.
The default password to manage this machine’s settings is located on the bottom of the machine and
marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
4. In the left navigation bar, click Administrator > External Card Reader.
If the left navigation bar is not visible, start navigating from .
5. Enter the necessary information, and then click Submit.
6. Connect the card reader to your machine.
7. Touch the card to the card reader when using card authentication.
Related Information
• Use Secure Function Lock 3.0
Related Topics:
• Access Web Based Management
186
To Next Page
Loading...
