• The Registrar is usually the wireless access point/router.
• The settings page may differ depending on the brand of wireless access point/router. For more detailed
information, see the instructions supplied with your wireless access point/router.
If using a Windows 10 or Windows 11 computer as a Registrar, complete the following steps:
5. Hold down the key and press the key on the computer's keyboard to launch Run.
6. Type "control printers" in the Open: field and click OK.
The Devices and Printers window appears.
If the Devices and Printers window does not appear, click View more devices > More devices and
printer settings.
7. Click Add a device.
• To use a Windows 10 or Windows 11 computer as a Registrar, you must register it to your network in
advance. For more information, see the instructions supplied with your wireless LAN access point/
router.
• If using Windows 10 or Windows 11 as a Registrar, you can install the scanner driver after wireless
configuration is finished by following the on-screen instructions. To install the driver and software
necessary to use your machine, go to your model's Downloads page at support.brother.com/
downloads.
8. Select your machine and click Next.
9. Type the PIN, and then click Next.
10. Click Close.
If your wireless device is connected successfully, the Wi-Fi LED stops flashing and remains lit.
You have completed the wireless network setup. To install drivers and software necessary for operating your
machine, go to your model's Downloads page at
support.brother.com/downloads.
ADS-1800W
1. Press [Settings] > [Network] > [WLAN(Wi-Fi)] > [WPS/PIN Code].
2. When [Enable WLAN? Do you want to continue?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless access point/router.
4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
116
To Next Page
Loading...
