Cause Action
Press Settings > Network > WLAN(Wi-Fi) > WLAN Status > Status.
If the LCD displays Connection Failed, ask your network administrator if
your IP address is valid.
Because the machine does not
support Kerberos
authentication, Network
scanning cannot be used.
Change the server settings or change the destination folder where your document
will be stored in the Scan to Network Profile from Web Based Management.
If you have checked and tried all of the actions, but your machine still cannot scan, uninstall the Brother software
and drivers and reinstall them.
Related Information
• Network Problems
Related Topics:
• Your Scanner Cannot Be Detected on the Network During Installation
• If You Want to Check that Your Network Devices are Working Correctly
• Error and Maintenance LEDs
233
To Next Page
Loading...
