Option Description
Store Directory Type the path (up to 255 characters) to the folder on the SFTP server
where you want to send your scanned data. Do not type a slash mark
at the beginning of the path (for example: brother/abc).
File Name Select a file name from the preset names provided, or from user-
defined names. You can set the user-defined names and file name
style in the Scan File Name menu in the navigation menu.
Quality Select a quality setting. When Auto is selected, you can adjust the
detection level of colour from the Auto Color detect adjust drop-
down list.
File Type Select the file type you want to use for the scanned document.
Document Size Select your document size from the list. This is necessary to make
sure the scanned file is the correct size.
Edge Fill for Plastic Card When On is selected, the four edges of the scanned plastic card
image are filled with white space.
Edge Fill for Plastic Card is available only for scanning from
the Card Slot.
Margin Settings Adjust your document's margins.
File Size Select your file size.
Skip Blank Page Select the On option to remove blank pages of the document from
the scanning results.
Skip blank page sensitivity Select the sensitivity level for detecting blank pages in the scanned
data. The higher the sensitivity, the easier it is for the machine to
detect blank pages.
Document Separation Split a scanned image.
When multiple documents have been scanned, you can split up and
save documents separately by using this function. You can also set
the number of pages to split a document by.
Color/Gray TIFF Compression Select the compression TIFF file type for a colour/grey document.
B&W TIFF Compression Select the compression TIFF file type for a monochrome document.
2-sided Scan Select On to scan both sides of the document.
Brightness Select the brightness level.
Contrast Select the contrast level.
Continuous Scan Scan more pages than the maximum capacity of the ADF and save
them as one data file.
Port Number Change the Port Number setting used to access the SFTP server.
The default for this setting is port 22. In most cases this setting does
not need to be changed.
8. Click Submit.
Related Information
• Scan to SSH Server (SFTP)
Related Topics:
• Access Web Based Management
62
To Next Page
Loading...
