HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Confidential
4-7
Error message Remedy
NO PAPER
Put paper in the empty tray. If the error was not cleared when you
put paper in the tray, match the size of paper that you selected in the
application with the TRAY SIZE or set the TRAY SIZE to ANY using
the control panel.
NO PAPER XXX
Put paper in the empty tray.
NO TRAY XXX
Put the paper tray in the printer.
PRINT OVERRUN
Cut the resolution or add the optional memory. Set Page Protection
to the correct size.
SIZE ERROR DX
You can only use A4, Letter and Legal size for duplex printing.
Check the printer driver setting and put the correct sized paper in the
paper tray or MP tray that is selected in the printer driver.
SIZE MISMATCH
Put the same size paper in the paper tray or MP tray that is selected
in the printer driver, and then press Go button, or set the size of
paper you loaded in by using the control panel.
STORAGE FULL
The RAMDISK size is set to 0 MB. Increase the RAMDISK size. Or
there is no space to store jobs. Delete unnecessary macros or fonts.
TOO MANY TRAYS
Maximum number of optional trays is two. Remove additional trays.
 Maintenance message
Maintenance message Remedy
DRUM NEAR END
The drum unit is near the end of its life. Replace it with a new one.
TONER LOW
Buy a new toner cartridge and have it ready before you get a TONER
LIFE END message.
TONER LIFE END
Replace the toner cartridge with a new one.
REPLACE PF KITMP
Replace the paper feeding kit (separation pad ASSY MP, MP roller
holder ASSY) for MP tray.
REPLACE PF KIT 1
REPLACE PF KIT 2
REPLACE KIT 3
Replace the paper feeding kit. (Separation pad ASSY, roller holder
ASSY and separation pad spring)
REPLACE FUSER
Replace the fuser unit.
REPLACE LASER
Replace the laser unit.
To Next Page
Loading...
Need help?
General