Brother HL-5280DW

HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Confidential
5-21
7.7 Outer Chute ASSY
(1) Hold the Knobs on the Outer chute ASSY and pull down this to your side.
(2) Remove the Arms of the Outer chute ASSY from the Pins.
(3) Remove the Outer chute ASSY.
Fig. 5-13
(4) Remove the bind B M3x8 Taptite screw.
(5) Lift up the side where the eject actuator is assembled of the Sub outer chute slightly (to
the direction of 5a), and move the Sub outer chute to the direction of 5b.
(6) Lift up the Sub outer chute to remove.
Fig. 5-14
Outer chute ASSY
1
3
Pin
Pin
2
1
1
<Back side>
Pin
Sub outer chute
Hooks
Outer chute ASSY
Taptite, bind B M3x8
6
5b
5a
Knob
Knob