CHAPTER 2 THEORY OF OPERATION
Confidential
2-24
3.7 Heat Control of Fuser Unit
The printer controls the temperature in the fuser unit in order to keep the constant image
quality when printing on any type or size of paper.
< Fixing temperature of each media type >
Media type
Fixing temperature (°C)
(approximately)
[Full speed / Half speed]
Plain paper 213/185
Plain paper (Small size) 200/185
Plain paper (Duplex) 195/180
Recycled paper 195/180
Recycled paper (Small size) 189/170
Recycled paper (Duplex) 189170
OHP 185
OHP (Small size) 185
OHP (Duplex) 185
Thin paper 195
Thin paper (Small size) 195
Thin paper (Duplex) 181
Thick paper 200
Thick paper (Small size) 195
Thick paper (Duplex) 195
Envelope (Thin) 200
Envelope (Thin, small size) 200
Envelope (Thin, duplex) 195
Envelope (Others) 220
Envelope (Others, small size) 220
Envelope (Others, duplex) 205
NOTE:
The values described in the table above are approximate and vary depending on the
conditions such as the operation environment or the like.
To Next Page
Loading...
Need help?
General