HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Confidential
1-21
3.8 Print Speeds with Various Settings
Print speed is up to 28 ppm for A4 size and 30 ppm for Letter size when loading A4 or Letter
size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4 / Letter size>
Media type setting All models
Transparency 28/30 ppm
Thin Paper 28/30 ppm
Plain Paper 28/30 ppm
Recycled Paper 28/30 ppm
Thick Paper,
Envelopes, Env.Thin
14 ppm
Thicker/Bond Paper,
Env.Thick
3 ppm
<Smaller size than A4 or Letter>
Media type setting All models
Transparency 28/30 ppm
Thin Paper 28/30 ppm
Plain Paper 90 sec 28/30 ppm Æ 14 ppm
Recycled Paper 90 sec 28/30 ppm Æ 14 ppm
Env.Thin 14 ppm
Thick Paper,
Envelopes
14 ppm
Thicker/Bond Paper,
Env.Thick
3 ppm
NOTE:
• The print speed may vary according to conditions, such as paper size and paper tray.
• When a smaller size paper than A4 or Letter is printed, the temperature on both edges of
the fuser unit is much higher than the temperature on the center of the unit where the paper
is fed depending on the setting or model. Therefore, the print speed is slowed in order to
decrease the temperature on the edges after the specified time, it is maximum print speed
when you first start printing.
• The actual print speed varies depending on the paper size.
To Next Page
Loading...
Need help?
General