HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
Confidential
4-13
Error message Remedy
Dust On Drum
• Refer to 3.2 “Cleaning the Corona Wire” in Chapter 3.
Print Overrun
• Press the Go button to print the data left in the printer. Cancel
the print job if you want to delete the data remaining in the
printer.
• If this does not clear the error, reduce the complexity of your
document or reduce the print resolution.
• Set page protection to AUTO by using the supplied Windows
®
driver or Remote Printer Console program.
• Change the following settings in the supplied Windows
®
driver
and try again. The best combination of these settings will vary
depending on your document:
• Graphics Mode
• TrueType mode
• Use Printer TrueType
®
Fonts
Service Call Error
• Check the LED indication or the LCD message to identify the
error. Refer to 2.2 “Service Calls” in this Chapter.