CHAPTER 4 TROUBLESHOOTING
Confidential
4-64
(6) Make sure that your print server appears. If it is visible, then the connection is good.
Otherwise, go to Step 4.
4. If you have tried 1 to 4 above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. For information how to reset to
the default factory settings, see Restoring the network settings to factory default on page
7-7.
<Error during printing>
If you try to print while other users are printing large amounts of data (e.g. many pages or color
pages with high resolution), the printer is unable to accept your print job until the ongoing
printing is finished. If the waiting time of your print job exceeds a certain limit, a time out
situation occurs, which causes the error message. In such situations, execute the print job
again after the other jobs are completed.
To Next Page
Loading...
Need help?
General