8 - 14 USING YOUR MACHINE WITH A MACINTOSH
®
Scanning from a Macintosh
®
(not available for Mac OS
®
8.6)
The Brother machine software includes a TWAIN Scanner driver for
Macintosh
®
. You can use this Macintosh
®
TWAIN Scanner driver
with any applications that support the TWAIN specifications.
Accessing the scanner
Run your Macintosh
®
TWAIN-compliant application software. The
first time you use the Brother TWAIN driver, set it as the default by
choosing Select Source (or the other menu name to select the
device). Afterwards, for each document you scan choose Acquire
Image or Scan. The scanner setup dialog box will appear.
If you want to scan from the machine on a network, you must
select the networked machine. See Configuring Network
Scanning on page 8-21.
The screen shown in this section are from Mac OS
®
X 10.2.4
The screen on your Macintosh
®
may vary depending on your
operating system.
The method of selecting the source or choosing to scan may
vary depending on the application software you are using.
(Mac OS
®
X 10.2.4)
To Next Page
Loading...
Need help?
General
