USING YOUR MACHINE WITH A MACINTOSH
®
8 - 29
COPY
COPY — allows you to use the PC and any printer driver for
enhanced copy operations. You can scan the page on the machine
and print the copies using any of the features of the machine printer
driver—OR—you can direct the copy output to any standard printer
driver installed on the PC including network printers.
You can configure your preferred settings on up to four buttons.
DEVICE SETTINGS
You can configure the machine settings or check the ink levels.
■
Remote Setup — enables you to open the Remote Setup
Program. (See MFC Remote Setup (Mac OS
®
X 10.2.4 or
greater) (not available for MFC-210C)
on page 8-45.)
■
Quick-Dial — enables you to open the Set Quick-Dial window of
the Remote Setup. (See MFC Remote Setup (Mac OS
®
X 10.2.4
or greater) (not available for MFC-210C) on page 8-45.)
■
Ink Level — enables you to check the ink status from the Remote
Setup Program. (See
MFC Remote Setup (Mac OS
®
X 10.2.4 or
greater) (not available for MFC-210C) on page 8-45.)
When the machine is connected to a network, you cannot use
this function.
To Next Page
Loading...
Need help?
General
