3 - 4 USING THE CONTROLCENTER2.0
PHOTOCAPTURE
(not available for MFC-5440CN and MFC-3240C)
This section contains three features which you can access the media
card inserted into the machine. This function is only available when
the machine is connected to the PC with USB.
■
Open PCC Folder — enables you to see the files and folders that
are on the media card. (See Using the PhotoCapture Center
™
from your PC
on page 6-1
.
)
■
Copy From PCC — enables you to copy the files on the media
card into the specific folder of the PC. You can select the
destination folder.
■
Copy To Application — enables you to copy the files on the
media card into the desktop folder of the image viewer
application.
COPY
Copy — allows you to use the PC and any printer driver for
enhanced copy operations. You can scan the page on the machine
and print the copies using any of the features of the machine printer
driver—OR—you can direct the copy output to any standard printer
driver installed on the PC including network printers.
You can configure your preferred settings on up to four buttons.
To Next Page
Loading...
Need help?
General
