EasyManuals Logo

Brother MFC-685CW User Manual

Brother MFC-685CW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
Chapter 14
102
Enhance Scenery 14
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a Make sure you have put the memory
card or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b Press a or b to choose
Photo Effects.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Enhance Scenery.
Press OK.
Note
You can also adjust the effect level
manually, by pressing a or b.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 106.)
If you do not want to change any
settings, press Color Start to print.
Remove Red-Eye 14
The machine detects eyes in your photos and
will remove red-eye from your photo.
Note
There are some cases when red-eye may
not be removed.
When the face is too small.
When the face is turning too far up,
down, left or right.
a Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b Press a or b to choose
Photo Effects.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose
Remove Red-Eye.
Press OK.
When Remove Red-Eye is
successful, the photo after effect is
shown. The adjusted part is shown in
a red frame.
When Remove Red-Eye is
unsuccessful,
Unable to Detect. is shown.
Press OK to go back to the previous
level.
Note
Press # to try Remove Red-Eye once
again.
e Press OK and a or b to increase or
decrease the number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 106.)
If you do not want to change any
settings, press Color Start to print.
Monochrome 14
You can convert your photo to black & white.
a Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).

Table of Contents

Other manuals for Brother MFC-685CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-685CW and is the answer not in the manual?

Brother MFC-685CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 12000 DPI
Print speed (black, normal quality, A4/US Letter)30 ppm
Print speed (color, normal quality, A4/US Letter)25 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP
Optical scanning resolution600 x 2400 DPI
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Sound power level (standby)50 dB
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5
Photo paper sizes (imperial)5x7, 5x8 \
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)USB
Dimensions (WxDxH)557 x 254 x 452 mm
Power requirementsAC 120V 50/60Hz
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Power consumption (standby)8 W
Power consumption (average operating)34 W
Operating temperature (T-T)50 - 95 °F
Operating relative humidity (H-H)20 - 80 %

Related product manuals