EasyManuals Logo

Brother MFC-685CW User Manual

Brother MFC-685CW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
83
11
11
Fax reports 11
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
Transmission Verification
Report 11
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the time and date of transmission
and whether the transmission was successful
(OK). If you choose On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Choosing On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
When the Transmission Verification Report is
turned Off or Off+Image, the Report will
only print if there is a transmission error, with
NG in the RESULT column.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Report Setting.
Press OK.
d Press a or b to choose Transmission.
e Press d or c to choose On, On+Image,
Off or Off+Image.
Press OK.
f Press Stop/Exit.
Fax Journal (activity report) 11
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days). If you set the interval to
Off
, you can still print the report by following
the steps on
How to print a report on page 84
.
The factory setting is
Every 50 Faxes
.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c
Press
a
or
b
to choose
Report Setting
.
Press OK.
d
Press
a
or
b
to choose
Journal Period
.
e Press d or c to choose an interval.
Press OK.
(If you choose 7 days, the LCD will ask
you to choose the first day for the 7-day
countdown.)
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory becomes full with
200 jobs before the time you chose
has passed, the machine will print
the Journal early and then erase all
jobs from the memory. If you want an
extra report before it is due to print,
you can print it without erasing the
jobs from the memory.
Every 50 Faxes
The machine will print the Journal
when the machine has stored 50 jobs.
f Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
g Press Stop/Exit.
Printing Reports 11

Table of Contents

Other manuals for Brother MFC-685CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-685CW and is the answer not in the manual?

Brother MFC-685CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 12000 DPI
Print speed (black, normal quality, A4/US Letter)30 ppm
Print speed (color, normal quality, A4/US Letter)25 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP
Optical scanning resolution600 x 2400 DPI
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Sound power level (standby)50 dB
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5
Photo paper sizes (imperial)5x7, 5x8 \
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)USB
Dimensions (WxDxH)557 x 254 x 452 mm
Power requirementsAC 120V 50/60Hz
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Power consumption (standby)8 W
Power consumption (average operating)34 W
Operating temperature (T-T)50 - 95 °F
Operating relative humidity (H-H)20 - 80 %

Related product manuals