EasyManuals Logo

Brother MFC-685CW User Manual

Brother MFC-685CW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
Telephone Services and External devices
55
7
Connecting an external
TAD (telephone
answering device)
7
You may choose to connect an external
answering device. However, when you have
an external TAD on the same telephone line
as the machine, the TAD answers all calls
and the machine ‘listens’ for fax calling (CNG)
tones. If it hears them, the machine takes
over the call and receives the fax. If it does
not hear CNG tones, the machine lets the
TAD continue playing your outgoing message
so your caller can leave you a voice
message.
The TAD must answer within four rings (the
recommended setting is two rings). The
machine cannot hear CNG tones until the
TAD has answered the call, and with four
rings there are only 8 to 10 seconds of CNG
tones left for the fax ‘handshake’. Make sure
you carefully follow the instructions in this
guide for recording your outgoing message.
We do not recommend using the toll saver
feature on your external answering machine if
it exceeds five rings.
Note
If you do not receive all your faxes,
shorten the Ring Delay setting on your
external TAD.
If You Subscribe to your Telephone
company's Distinctive Ring Service:
You may connect an external TAD to a
separate wall jack only if you subscribe to
your telephone company's Distinctive
Ring service, have registered the
distinctive ring pattern on your machine,
and use that number as a fax number. The
recommended setting is at least four rings
on the external TAD when you have the
telephone company's Distinctive Ring
Service. You cannot use the Toll Saver
setting.
If You Do Not Subscribe to Distinctive
Ring Service:
You must plug your TAD into the EXT.
jack of your machine. If your TAD is
plugged into a wall jack, both your
machine and the TAD will try to control the
telephone line. (See the illustration
below.)
1TAD
When the TAD answers a call, the LCD
shows Ext. Tel in Use.
1
1

Table of Contents

Other manuals for Brother MFC-685CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-685CW and is the answer not in the manual?

Brother MFC-685CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 12000 DPI
Print speed (black, normal quality, A4/US Letter)30 ppm
Print speed (color, normal quality, A4/US Letter)25 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP
Optical scanning resolution600 x 2400 DPI
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Sound power level (standby)50 dB
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5
Photo paper sizes (imperial)5x7, 5x8 \
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)USB
Dimensions (WxDxH)557 x 254 x 452 mm
Power requirementsAC 120V 50/60Hz
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Power consumption (standby)8 W
Power consumption (average operating)34 W
Operating temperature (T-T)50 - 95 °F
Operating relative humidity (H-H)20 - 80 %

Related product manuals