EasyManuals Logo

Brother MFC-685CW User Manual

Brother MFC-685CW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
Chapter 6
44
Receive mode settings 6
Ring Delay 6
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension telephones on the same line as the
machine or subscribe to the telephone
company’s Distinctive Ring service, keep the
ring delay setting of 4.
(See Using external and extension
telephones on page 58 and Easy Receive
on page 45.)
If toll saver is On, then the ring delay setting
has no effect. See Setting toll saver
on page 71.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Ring Delay.
Press OK.
e Press a or b to choose Ring Delay
again.
f Press d or c to choose how many times
the line rings before the machine
answers (0-4).
Press OK.
If you choose 0, the line will not ring at
all.
g Press Stop/Exit.
F/T Ring Time
(Fax/Tel mode only) 6
If you set the Receive Mode to Fax/Tel, you
need to decide how long the machine will
signal you with its special pseudo/double-ring
when you have a voice call. If it's a fax call,
the machine receives the fax.
This pseudo/double-ring happens after the
initial ringing from the telephone company.
Only the machine rings and no other
telephones on the same line will ring with the
special pseudo/double-ring. However, you
can still answer the call on any telephone on
the same line as the machine. (See Using
external and extension telephones
on page 58.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
F/T Ring Time.
e Press d or c to choose how long the
machine will ring to alert you that you
have a voice call (20, 30, 40 or 70
seconds).
Press OK.
f Press Stop/Exit.
Note
Even if the caller hangs up during the
pseudo/double-ringing, the machine will
continue to ring for the set time.

Table of Contents

Other manuals for Brother MFC-685CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-685CW and is the answer not in the manual?

Brother MFC-685CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 12000 DPI
Print speed (black, normal quality, A4/US Letter)30 ppm
Print speed (color, normal quality, A4/US Letter)25 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP
Optical scanning resolution600 x 2400 DPI
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Sound power level (standby)50 dB
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5
Photo paper sizes (imperial)5x7, 5x8 \
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)USB
Dimensions (WxDxH)557 x 254 x 452 mm
Power requirementsAC 120V 50/60Hz
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Power consumption (standby)8 W
Power consumption (average operating)34 W
Operating temperature (T-T)50 - 95 °F
Operating relative humidity (H-H)20 - 80 %

Related product manuals