Troubleshooting and Routine Maintenance
153
B
f Do one of the following:
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
g For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
h For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
i Press Stop/Exit.
Checking the ink volume B
Although an ink volume icon appears on the
LCD, you can use the Ink key to see a large
graph showing the ink that is left in each
cartridge.
a Press Ink.
b Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh
®
in the
Software User’s Guide on the CD-ROM.)
Uninstalling and installing the
handset and handset cradle
(MFC-685CW only) B
If you do not use the handset you can remove
the handset and handset cradle.
Uninstalling the handset and handset
cradle
B
a Unplug the curled handset cord from the
machine.
b Pull the tab (1) back and hold it in
position as you push the cradle (2) to the
back of the machine.
1
2
To Next Page
Loading...
