EasyManuals Logo

Brother MFC-685CW User Manual

Brother MFC-685CW
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Chapter 5
40
Setting your changes as the
new default 5
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Scan Size you use
most often by setting them as default. These
settings will stay until you change them again.
a Press (Fax).
b Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring all settings to the
factory settings 5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Press (Fax).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Sending a fax manually 5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a Press (Fax).
b Load your document.
c To listen for a dial tone do one of the
following:
(MFC-685CW)Press
Speaker Phone or pick up the
handset.
(MFC-885CW) Press
Speaker Phone on the machine.
d Dial the fax number.
e When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
f Replace the handset.
Sending a fax at the end of a
conversation 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press Black Start or Color Start.
If you are using the scanner glass,
press 1 to send a fax.
d Replace the handset.

Table of Contents

Other manuals for Brother MFC-685CW

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-685CW and is the answer not in the manual?

Brother MFC-685CW Specifications

General IconGeneral
Print technologyInkjet
Maximum resolution6000 x 12000 DPI
Print speed (black, normal quality, A4/US Letter)30 ppm
Print speed (color, normal quality, A4/US Letter)25 ppm
Digital senderNo
Maximum duty cycle2500 pages per month
Number of print cartridges4
Image formats supportedBMP
Optical scanning resolution600 x 2400 DPI
PC free copyingYes
Copy speed (black, normal quality, A4)22 cpm
Copy speed (color, normal quality, A4)20 cpm
FaxingColor faxing
Fax memory480 pages
Modem speed14.4 Kbit/s
Total input capacity100 sheets
Total output capacity50 sheets
DisplayLCD
Display diagonal3.3 \
Market positioningHome & office
Sound power level (standby)50 dB
Paper tray media typesGlossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizesExecutive
ISO A-series sizes (A0...A9)A4, A5
Photo paper sizes (imperial)5x7, 5x8 \
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)USB
Dimensions (WxDxH)557 x 254 x 452 mm
Power requirementsAC 120V 50/60Hz
Wireless technology802.11b/g
All-in-one functionsCopy, Fax, Scan
Color all-in-one functionscopy, fax, print, scan
Power consumption (standby)8 W
Power consumption (average operating)34 W
Operating temperature (T-T)50 - 95 °F
Operating relative humidity (H-H)20 - 80 %

Related product manuals