Brother MFC-8690DW - Page 119

Control panel setup
108
6
f Press a or b to choose None, SMTP-AUTH or POP bef.SMTP.
Press OK.
g If you chose None or POP bef.SMTP in step f, go to step k.
If you chose SMTP-AUTH in step f, go to step h.
h Enter the account name for SMTP authentication.
Press OK.
i Enter the account password for SMTP authentication.
Press OK.
j Enter the account password again.
Press OK.
k Press Stop/Exit.
6
POP3 Server
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose POP3 Server.
Press OK.
f Press a or b to choose Name? or IP Address?.
Press OK.
g Enter the POP3 server address (up to 64 characters).
Press OK.
h Press Stop/Exit.
6