22
3
5
Enter a new SSID. For information how to type text, see Entering Text on page 153.
Press OK. Go to step 6.
6
Using ▲ or ▼, select Infrastructure when instructed. Press OK. Go to step 7. For more information
on Ad-hoc and Infrastructure mode, see Wireless network connection example on page 15. If you select
Ad-hoc, go to step 8.
7
Select the Authentication method using ▲ or ▼, and press OK.
If you select Open System, go to step 8.
If you select Shared Key, go to step 9.
If you select WPA/WPA2-PSK, go to step 12.
If you select LEAP, go to step 13.
8
Select the Encryption type, None or WEP using ▲ or ▼, and press OK.
If you select None, go to step 15.
If you select WEP, go to step 9.
22.Setup WLAN
SSID:
Enter & OK
22.Setup WLAN
Mode Select
▲ Ad-hoc
▼ Infrastructure
Select ▲ ▼ & OK
22.Setup WLAN
Auth. Select
▲ Open System
▼ Shared Key
Select ▲ ▼ & OK
22.Setup WLAN
Auth. Select
▲ WPA/WPA2-PSK
▼ LEAP
Select ▲ ▼ & OK
22.Setup WLAN
Encryption Type?
▲ WEP
▼ None
Select ▲ ▼ & OK
To Next Page
Loading...
