Printing and Faxing
137
7
Feature Sets: Set 2
Color/Mono
You can change the Color/Mono settings as follows:
• Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no
color content is detected, it prints in monochrome. The total printing speed may become slower.
• Color
When your document contains color and you want to print it in color, select this mode.
• Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes
the print processing speed faster than color mode. If your document contains color, selecting Mono
mode prints your document in 256 levels of gray.
Note
If the Cyan, Magenta or Yellow toner reaches the end of its life, choosing Mono will allow you to keep
printing as long as the Black toner does not reach the end of its life.
Color Mode
You can change the color mode as follows:
• Normal
This is the Default color mode.
• Vivid
The color of all elements are adjusted to become a more vivid color.
• None
If you want to apply the setting of the application, choose this setting. The printer driver does not adjust
the color.
Improve Gray Color
You can improve the image quality of shaded areas by ticking the Improve Gray Color pop-up menu.
To Next Page
Loading...
Need help?
General
