Brother PC-FAX Software (MFC-9120CN and MFC-9320CW only)
88
5
Sending a file as a PC-FAX using the Facsimile style user interface 5
a Create a file in any application on your PC.
b Click File, then Print.
The Print dialog box appears:
c Choose Brother PC-FAX v.2 as your printer, and then click Print.
The Facsimile style user interface appears:
Note
If the Simple style user interface appears, change the user interface selection setting. (See Sending setup
on page 85.)
d Enter a fax number using any of the following methods:
Use the dial pad to enter the number.
Click any of the 10 Speed Dial buttons.
Click the Address Book button, and then choose a member or group from the Address Book.
If you make a mistake, click Clear to delete all the entries.