Brother P-touch PT-D600 - Setting 輸入模式; 標籤外貌 Mode; 列印預覽 Mode

14
Setting 輸入模式
GETTING STARTED
Setting 輸入模式
The default setting is [ 標籤外貌 ].
 標籤外貌 Mode
The character attributes, frames and some other settings are shown on
the LCD screen while creating a label. This enables you to easily check
what the label will look like.
Example:
NOTE
You can press ( ) to change the magnification of the LCD screen.
This enables you to switch to a magnification that is comfortable for
creating labels.
 列印預覽 Mode
The character attributes, frames and some other settings are not shown
on the LCD screen while creating a label. You can check what the label
will look like using the preview function. Refer to “Previewing Labels” on
page 44.
Example:
()  / [設定 ]  ( ) or ( )  / [輸入模式 ] 
( ) or ( )
 / [標籤外貌 ]  ( ) or ( ).
()  / [設定 ]  ( ) or ( )  / [輸入模式 ] 
( ) or ( )
 / [列印預覽 ]  ( ) or ( ).