18
Entering and Editing Text
EDITING A LABEL
• A maximum of 9 blocks can be entered in one label.
• If you press ( ) and ( ) when nine blocks already exist,
[ 超過最大允許段落數 ] will display. Press ( ) or any other key to
clear the error message.
Deleting Text
By pressing ( ), the letters will be deleted one by one.
To delete all text:
To delete all text and format settings:
Inserting a Tab
To insert a tab, press the following keys.
When using the print preview mode, the symbol ( ) will then appear on
the screen.
To delete a tab from a label, position the cursor to the right of the tab
mark on the text entry screen and press ( ).
To change the tab length:
You can also set the tab length by typing in the desired tab length.
To apply the setting, after typing in the tab length, press ( ) or
( ) and then ( ) or ( ) again.
() / [內容 ] ( ) or ( ).
() / [內容和格式 ] ( ) or ( ).
() / [Tab] () or ( ).
() / [標籤空白長度 ] ( ) or ( ) /
[0-100 mm]
( ) or ( ) ( ) to return to the text entry screen.
To Next Page
Loading...
