Brother P-touch PT-D600 - Using 寬度分類範例

EDITING A LABEL
33
Using 預設格式 Layouts
 Using 寬度分類範例
Simply select a layout from the block layouts, enter the text and apply
formatting as desired.
NOTE
• On the print menu screen:
 Select [ 內容編輯 ] to change the text data or
the barcode setup.
 Select [ 儲存 ] to store the label to the file
memory.
For the file memory, refer to “USING THE FILE MEMORY” on
page 51.
 Select [ 選單 ] to change the 英字形、縱印、對齊 or 外框 settings.
 Select [ 預覽 ] to preview the label before printing. Press ( ) to
change the magnification of the LCD screen.
 Select [ 列印選項 ] to set the print settings. For details, refer to “ 自動
跳號 ” on page 45 or “ 鏡像列印 ” on page 45.
• If the width of the current tape cassette does not match the set width
for the selected layout, an error message will display when you try to
print the label. Press ( ) or any other key to clear the error
message, and insert a tape cassette of the correct width.
()  / [ 預設格式 ]  () or ( )  / [ 寬度分類範例 ]
 ( ) or ( )  / Select a tape width  ( ) or ( )
 / Select a block layout  ( ) or ( )  Enter the text 
() or ( )
 Repeat for each text field  ( ) or ( ) to
display the print menu
 / [列印 ]  ( ) or ( )  /
Select the number of labels to be printed
 ( ), ( ) or ( ).